|
A
diagram showing the wiring of the 1300 liter tank. [1]
Detail of the connection of the water hose [1]
on the bottom of the tank. The hole was drilled on the
glass before tank assembly. The valve was added while building it,
in the third compartment of the filter [2].
This hose will empty the tank in less than 30 minutes. [3]
The 3500 l/h water pump, housed in the fourth and last filter
compartment. Again, a hole was drilled on the glass separating the
filter from the main tank before tank assembly. [4]
The 2500 l/h water pump. The outlet of the pump is glued on the side
glass and the water is forced to travel in parallel to the water
surface. [5]
One more 3500 l/h water pump which only works in summer for extra
agitation on the water surface and a better gas exchange. [6],
[7] Self-cut
sponges are used as pre-filters for the intakes of the two water
pumps. |
